Alright, I’m going to continue our virtual temple tour with the St. George Utah LDS Temple. There wasn’t very good lighting that day because there wasn’t a cloud in the sky! So here’s a photography tip, to get good LDS Temple pictures you need diffused lighting which is either: a cloudy day, sunrise, sunset, or twilight.  Well, because I didn’t have any of those, I decided to just play around with the “star effect” also known as the “starburst effect“.

To get the star effect you need to point your camera right into a light source. So an obvious light source is the sun. Other light sources could be head lights on a car or a lamp post.

Next, you need to crank up your F number on your camera to create a small aperture. Aperture is measure by F/# so the bigger the F number the smaller the aperture. You can do this by being in the Av mode which is the aperture priority mode on your digital SLR camera. You don’t need a nice lens or anything you can just use the lens that comes with the camera.

These two pictures below were taken at F/22.

If you can get a small light source you can use a smaller F number. This picture was taking at F/8.

On a side note, we believe in The Church of Jesus Christ of Latter-day Saints (aka Mormon or LDS) that these temples are “Beacon[s] to the World.” A beacon as define in Merriam-Webster online dictionary is: “a strong light that can be seen from far away and that is used to help guide ships, airplanes, etc.” If you have every seen one of these LDS Temples at night, you would know that these temples glow. You can see these temples from far away. We believe that temples are beacons because temples draw people nearer to God and Jesus Christ.

Anyways… if you want to learn more about LDS Temples please visit my other posts about temples!

BTW you don’t have to be a member of our church to take pictures of our temples. So, please come take pictures of our temples! Have you ever taken pictures of LDS Temples? Please share!